Views: 56 Author: Site Editor Publish Time: 2022-05-23 Origin: Site
If you've decided to install laminate flooring on a new or existing floor, it's essential to use a 3/8" compressible PE foam backer rod. This rod will help you fill the expansion gap, which will minimize the need for 100% flexible silicone sealant. The backer rod will also ensure that the silicone stays toward the surface of the floor and wall. Here are a few tips to keep in mind:
A nonabsorbent backer rod that acts as a back stop for tooling for sealant installation. This backer rod prevents the sealant from going too deep and yields proper bond breaks between the backer material and sealant. The backer rod also limits the depth of sealant application, reducing the chance of excessive use and saving caulk and sealant. Once you've figured out which type of Backer Rod is right for your project, you're ready to start adding a layer of foam!
Another helpful feature of Compressive PE Foam Backer Rods is that they help maintain an hourglass profile of sealants and prevent harmful three-sided adhesion in moving joints. The rod is typically available in one-fourth-inch diameters, though some are larger and smaller. For the most accurate measurements, choose the one that suits your application best. A quality backer rod will ensure that your finished product is firm and durable.
The 3/8-inch-thick Backer Rod can be used for filling large gaps, such as around windows and doors. This backer rod also provides a sound surface for caulking projects. Whether you're using it for exterior or interior purposes, it's the perfect way to add extra protection. When using this backer rod, you'll be pleased with its superior bonding properties. Its rigidity and low-density make it ideal for filling large gaps.
Compressive PE foam backer rods are a must for many construction projects. This product is an extruded, round, low-density polyethylene foam that is a durable, non-hazardous alternative. Its composition is based on isobutane and polyethylene resin and meets or exceeds the standards set by ASTM International. Similarly, FillPro Standard Backer Rod is an extruded round low density polyethylene foam material. It's flexible, compressible, and non-absorbent.
| | 1/F, NO.81, CHANGZHEN ROAD, SHUIKOU TOWN, KAIPING CITY, GUANGDONG, CHINA |
| | +86-0-136 3183 6942 / +86-0-134 2677 9895 +86-750-2280358 |
| |
